Pegasos XL
The Enervent Pegasos XL unit is best suited for large detached houses and public spaces, such as schools and kinder gardens.
Pegasos XL can be fitted with a built-in extract air heat pump (HP). All heating and cooling coils, as well as the heat pump unit, are built-in to the unit. The Pegasos HP with a built-in heat pump effectively cools and heats the air on demand. The cooled and heated air is evenly distributed throughout the building via the ventilation ducts (not local point formed distribution, as in traditional heat pumps). In addition, the heat pump offers the unique feature of heating water
(Aqua). The water can be used as domestic hot water or in a water-borne heating system.
Enervent Pegasos XL is a ‘non-residential ventilation unit’ (NRVU) according to the EU Commission Regulation No 1253/2014. Ventilation units with maximum flow rate over 250 m³/h which the manufacturer has not declared intended as being exclusively for a residential ventilation application are called non-residential. Non-residential ventilation units (NRVUs) are excluded from EcoDesign labelling.
Our calculation software Energy Optimizer, reports whether the chosen NRVU unit fulfills the EcoDesign requirements or not for the intended project.
Duct connections
Control options
 eAir |  eWind | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Fan speed settings | Through operation modes | 4-step | |||||||
| Supply air temperature set point | |||||||||
| Control of electrical after heater | |||||||||
| Over pressure mode | |||||||||
| Alarm and maintenance reminder | |||||||||
| Humidity boosting | |||||||||
| Possibility to connect two panels to one unit | |||||||||
| Cooling recovery | Automatic | Automatic | |||||||
| KNX connectivity | |||||||||
| Commissioning parameters view | |||||||||
| On-off control for CHG brine pump | |||||||||
| On-off control for GWC damper motor | |||||||||
| Control for CHG coil 3-way valve motor | |||||||||
| Exercising of brine pumps during standby | |||||||||
| Exercising of the HRW during standby | |||||||||
| Modbus RTU | |||||||||
| Modbus TCP/IP | |||||||||
| Stepless control of heat recovery | |||||||||
| Control of damper motors | |||||||||
| Control of electrical pre-heater | |||||||||
| Control of water pre-heater/cooler | |||||||||
| Control of water heater | |||||||||
| Eco mode | |||||||||
| Control of water cooler | |||||||||
| Boosting function | |||||||||
| Measurements view | |||||||||
| Carbon dioxide boosting | |||||||||
| Time programs | |||||||||
| Summer night cooling | |||||||||
| Temperature boosting | |||||||||
| Compensation for hood/central vacuum cleaner | |||||||||
| Constant duct pressure mode | |||||||||
| Internet user interface | |||||||||
| Time extension mode | |||||||||
| Setup wizard | |||||||||
| Show more features | |||||||||
| Show less features | |||||||||
This feature is always included
This feature is available with extra equipment
Datasheet
Models
| Product number | Unit |
|---|---|
| P06 212 0008 | Pegasos HP-W eAir |
| P06 212 0007 | Pegasos HP-E eAir |
| P06 211 0102 | Pegasos XL eAir E |
| P06 211 0103 | Pegasos XL eAir E-CG |
| P06 211 0106 | Pegasos XL eAir W |
| P06 211 0107 | Pegasos XL eAir W-CG |
| P06 212 0002 | Pegasos HP eAir |
| P06 115 0007 | Pegasos TwinTropic CW-E |
| P06 115 0009 | Pegasos TwinTropic X-E |
| P06 301 0102 | Pegasos XL eWind E |
| P06 301 0103 | Pegasos XL eWind E-CG |
| P06 301 0106 | Pegasos XL eWind W |