• LTR-5 Z Cooler
  • LTR-5 Z Cooler
  • LTR-5 Z Cooler

LTR-5 Z Cooler

Enervent LTR-5 Z Cooler is a ventilation unit with integrated compressor cooling unit for ventilation of single-family houses,  terraced houses and offices. The horizontal ventilation device is particularly suitable for spaces where high ventilation solutions are not possible.

The advantage of the LTR-5 Z Cooler is that cooling is achieved without drafts. The cold is evenly distributed along the ventilation ducts in all rooms with a supply air valve. This is a clear advantage compared to, for example, a traditional air source heat pump, which only cools the room where the indoor unit is located. The LTR-5 Z Cooler also does not need a separate outdoor unit.

The horizontal ventilation unit LTR-5 Z and the integrated Cooler module can be installed on the roof, attic, false ceiling or technical space, providing flexibility in the use of the space. The cooler module is placed next to the ventilation unit. The cooler module can also be retrofitted to previously purchased LTR 5 Z units as well as to LTR-3 and LTR-7 models.

Duct connections

The LTR-5 Z Cooler is available with a right-handed duct connection layout.

Control options

eAir
eAir
Fan speed settingsThrough operation modes
Supply air temperature set point
Control of electrical after heater
Over pressure mode
Alarm and maintenance reminder
Humidity boosting
Possibility to connect two panels to one unit
Cooling recoveryAutomatic
KNX connectivity
Commissioning parameters view
On-off control for CHG brine pump
On-off control for GWC damper motor
Control for CHG coil 3-way valve motor
Exercising of brine pumps during standby
Exercising of the HRW during standby
Modbus RTU
Modbus TCP/IP
Stepless control of heat recovery
Control of damper motors
Control of electrical pre-heater
Control of water pre-heater/cooler
Control of water heater
Eco mode
Control of water cooler
Boosting function
Measurements view
Carbon dioxide boosting
Time programs
Summer night cooling
Temperature boosting
Compensation for hood/central vacuum cleaner
Constant duct pressure mode
Internet user interface
Time extension mode
Setup wizard
 Show more features
 Show less features

This feature is always included

This feature is available with extra equipment

+/- 680 m³/hMeasured at 100 Pa with F7/M5 filters
336 m²

Datasheet

Ø
Ducts
Ø 200 mm
Width
1999 mm
Height
528 mm
Depth
523 mm
Weight
121 kg
Can also be installed in a cold space with extra insulation

Models

Product number Unit
LTR-5 Z Cooler eAir E